|
|
|
INTRODUCING
MODEL 619
AIR HORN
123.5 Decibels-320 Hz
US D611,864, US Pat. 7,978,078, US 7,802,535, US 7,712,430 EP DSN NO. 001129159-0001,
CN Pat.ZL200930182277.0, OHIM 001320824-0001-0002, OHIM 001320832-0001-0002 & Other patents pending
Wolo’s new Model 619, BIG BAD MAX air horn uses the same proven patented technology and design as Wolo's original Bad Boy. BIG BAD MAX has a sound chamber designed to create a deep big rig sound, three times (3X) louder than a factory horns. The sound chamber has also been engineered to allow the user to clean any road dirt or dust, without any special tools, assuring a powerful and reliable horn for the life of the vehicle.
BIG BAD MAX is the perfect choice for all 12-volt vehicles: cars, trucks, motorcycles, boats and etc. The one-piece patented design requires no hoses like conventional air horns. Easily installs with one bolt that is provided, transfer the vehicle’s factory horn wires to BIG MAD MAX’S compressor and the installation is complete. Built with a heavy-duty compressor that is maintenance free assuring years of dependable service. The housing is made from super strong ABS plastic with a black stealth finish. If you want a deep sounding powerful air horn sound, go no further, BIG BAD MAX is the horn for you! THEY WILL HEAR YOU BEFORE THEY CAN SEE YOU!™
123.5 Decibels - 320 Hz, 12-volt
L 5-3/4 in. x W 3-1/2 in. H 4-5/8 in.
30-amp relay included
HEAR A SAMPLE OF BIG BAD MAX
Sound file is to demonstrate horns sound not loudness
| PRICE $69.99 |
|
Want more product information?
Click on Doug, Wolo's customer service associate.
Wolo’s new low profile LED mini bar light,
OUTER LIMITS,
has a unique aerodynamic appearance that will look great on any vehicle.
Using the latest GEN III LED technology, OUTER LIMITS produces an ultra
powerful beam of light, which can even be seen in bright daylight.
There are six GEN III modules, each containing four 1-watt LEDs, which
are long life, maintenance free, and best of all, there are no bulbs to burn
out. OUTER LIMITS microprocessor
allows the user to select from eight different light patterns with the simple
touch of a button. The
control panel can be mounted on the vehicle’s dashboard or consol using the
double face tape provided. The
easy to use control panel has an on/off switch, mode pattern selector, and two
mini-LEDs that indicate the light pattern in use. Comes complete with a 10 ft. heavy gauge power cord and a
cigarette lighter plug with an internal fuse. The four magnets have adjustable positioning and are rubber
covered to prevent scratching the vehicle’s paint, while holding the mini
light bar securely in place. Designed
to be waterproof for all weather conditions.
OUTER LIMITS is ideal for those who require a simple to use, low profile
mini bar light with a high intensity output, and low power consumption. Model
3770M-A – Amber Lens Model 3775M-B – Blue Lens Model 3780M-R – Red Lens SPECIFICATION:
Click To See A Demonstration Of
OUTER LIMITS
L 16-1/2 in. x W 8-1/2 in. x H 3-1/8 in.
GEN III technology
Voltage: 11~15-Volt DC
Light Pattern: 8
Six-(6) Light modules each containing four 1-watt GEN III
LEDs
LIGHT PATTERNS:
All LEDs are illuminated low power (no flash) /
.47 amp
All LEDs illuminate together with single flash /
4.50 amp
All LEDs illuminate together with double flash /
2.93 amp
All LEDs illuminate together with quad flash /
2.73 amp
LEDs illuminate with single flash alternating
pattern / 2.40 amp
LEDs illuminate with fast double flash
alternating pattern / 1.56 amp
LEDs illuminate with fast quad flash alternating
pattern / 1.41 amp
LEDs illuminate with random alternating pattern /
4.54 amp
Magnet pull strength 4 – 55 lbs. The four magnets are
rubber covered to protect the vehicles paint.
|
|
LENS COLOR |
MAGNET MOUNT |
|---|---|---|
|
|
AMBER |
3770M-A |
|
|
BLUE |
3775M-B |
|
|
RED |
3780M-R |
|
PRICE $499.99 |
|
Want more product information?
Click on Doug, Wolo's customer service associate.
Model 3050-A Amber
GEN 3 LED Technology
Wolo’s B-SEEN is designed for the user that requires the cutting edge GEN III LED warning light technology at an economical price. Designed with the finest quality electronic components throughout to assure low power consumption and years of dependable service. The 1-WATT LEDs ARE SUPER BRIGHT and produce 80 double flashes per minute. B-SEEN has no bulbs to burn out or replace, and is totally maintenance free. The fresnel lens is engineered to increase the light’s visibility. B-SEEN has a powerful magnet base that is protected and will not scratch the vehicle’s paint. Simple to use, comes with a 10 ft. power wire with cigarette lighter plug.
Specifications
Base Diameter: 5 in.
Lens Diameter: 3-5/8 in.
Height: 4 in.
12-Volt / 27.5 mA
|
PRICE $39.99 |
|
Want more product information?
Click on Doug, Wolo's customer service associate.
MODEL 497
Mini-Hand Held Gas Horn
The Model 497 is compact in size making it easily to be carried. iHorn delivers a power blast that will be heard with the simple press on the horn button. Ideal for marine, jogging, camping, sports events and anytime a powerful horn is needed to signal. iHorn is environmentally safe using 134a gas (no CFC’s), 1.8 oz.
|
PRICE $9.99 |
|
Want more product information?
Click on Doug, Wolo's customer service associate.
GEN
3 LED WARNING LIGHT
Quad Flash Permanent Mount
Wolo’s new APOLLO 1 warning light is built with twenty (20) super bright one-watt GEN 3 LEDs that are maintenance free, with no bulbs or strobe tubes to burn out. APOLLO 1 produces an ultra powerful quad flash that can be seen at great distances, for true 360 visibility. The lens is made of strong polycarbonate plastic with an optics designed specifically made to enhance the brightness of the GEN 3 LEDs. For easy replacement, the lens threads onto the light’s base without any tools. APOLLO1 is built with proven state-of-the art electronics that are sealed to protect against vibrations, moisture, and engineered to reduce EMI compared to gaseous discharged systems. Operational at 12 - 100 volts DC with a peak current draw of 1.37 amps. Comes complete with all required mounting hardware, wire terminals, in-line fuse holder and a rubber gasket to ensure a waterproof installation.
Model 3060P-A - Amber Lens Specifications
Model 3065P-B - Blue Lens Base Diameter: 7 in Operating Voltage: 12 – 100 volts DC
Model 3070P-R – Red Lens Len Diameter: 4-1/2” Currant: Peak 1.37 Amps
Model 3075P-C – Clear Lens Height: 6-3/4” 20 - GEN 3 1-Watt LED’s
Model 3077P-G –Green Lens Quad Flash Mounting: Permanent Screws Provided
| PRICE $89.99 | |
Want more product information?
Click on Doug, for a demostration
GEN
3 LED WARNING LIGHT
8 Selectable Flash Patterns
Permanent Mount
Wolo’s APOLLO 8 GEN 3 LED warning light is built with twenty (20) one watt GEN 3 LEDs that are long life and totally maintenance free, with no bulbs or strobe tubes to burn out. APOLLO 8 is engineered to provide the user with reliable performance in all weather conditions. APOLLO 8 is designed for heavy-duty use with an operating voltage of 12 – 60 volts DC and a peak current draw of 1.37 amps. The proven microprocessor is encapsulated to protect against vibration and moisture. Ideal for installation on any vehicle that requires reduced EMI compared to warning lights that have motors or gaseous discharge systems. With the push of a button, choose from eight (8) warning light patterns that are ultra powerful and sure to be seen at great distances for true 360° visibility. The lens is replaceable, made of strong polycarbonate plastic with advanced optics designed specifically made to enhance the brightness of the GEN 3 LEDs. The rugged aluminum base is painted black to protect against corrosion. There are two methods of securing the light: pipe-mount or to a flat surface using the hardware provided. Comes complete with all required mounting hardware, wire terminals, in-line fuse holder and a rubber gasket to ensure a waterproof installation.
Model 3080PPM-A - Amber Lens Specifications
Model 3085PPM-B - Blue Lens Base Diameter: 7 in Operating Voltage: 12 – 60 volts DC
Model 3090PPPM-R – Red Lens Len Diameter: 4-1/2” Currant: Peak 1.37 Amps
Model 3095PPM-C – Clear Lens Height: 6-3/4” 20 - GEN 3 1-Watt LED’s
Model 3097PPM-G –Green Lens Selectable Flash Patterns: 8 Mounting: Pipe Mount 1" NPT or Screws Provided
| PRICE 119.99 | |
Want more product information?
Click on Doug, for a demostration
Model
BAS-100 back-up alarm electro-mechanical activation switch, is designed to turn
on/off any back-alarm when the vehicle is not equipped with back-up lights.
The switch comes with a universal, adjustable mounting. Mount the switch
adjacent to the gearshift lever linkage. When
vehicle is in reverse the linkage will move the switch’s actuator arm,
activating the back-up alarm. SWITCH
SPECIFICATIONS
FOR PRODUCT INFORMATION OR TO PLACE AN ORDER CALL: 1-800-645-5808
Monday - Friday 8:00 A.M. thru 4:30 P.M. Eastern Standard Time
PRICE $29.99
E-MAIL ANY QUESTIONS
