WOLO INDUSTRIAL HORNS; ELECTRONIC, AIR & ELECTRIC

INDUSTRIAL HORNS

ELECTRONIC HORN
Model EE100

114.4 Decibels - 380 Hz - 12-60 Volts

A new-patented horn technology developed by Wolo with R & D extended over one and half years. An all-electronic horn provides many advantages over the existing electro-mechanical types.

SPECIFICATIONS:

• Low current demand, works directly from horn switch – No relay.

• Capable of using a lighter gauge of wire in horn circuit.

• No adjustment screws for frequency. Tamper-proof.

• No diaphragm fatigue, no volume or frequency changes

• No moving points to pit or wear-out. All internal electronic components epoxy making them virtually weather resistant.

• Plastic molded housing. Assortment of mounting brackets.

• No moving contact points, no sparks, no induced noise in sensitive equipment.

• Power terminals molded into heavy plastic housing eliminating rain and spray water damage as is common in conventional horns.

• Dimensions: W 4-7/8 x H 4-3/4 x L 4-3/4

UL Recognized

Patented:
U.S. 6,489,885, Taiwan 090,132,954, China ZL01823136.5, Hong Kong 1,062,284 & European EP1,363,808

HEAR A SAMPLE OF EE100
Sound file is to demonstrate horns sound not loudness

SERIES 370 / 115 Decibels

Wolo offers the finest horns for industrial application. The 370 series is available in a full range of voltages to meet your requirements; 12, 24, 36, 36/48, 48 or 72 volt. There is a large selection of mounting brackets available. If your company requires a special bracket, Wolo can tool to your needs. The 370 series is constructed of all metal, with a durable painted black finish. Terminals can be either screw type, 1/4" push-on or two terminals per pole using screw post and 1/4" push-on. The diameter is 123 mm. Available in either high or low tone. UL LISTED

SPECIFICATIONS
MODEL	VOLTAGE	TERMINALS	TONE	FREQUENCY	DECIBEL	AMP
370-12L2	12	2	LOW	345 Hz	115	4.0
370-12H2	12	2	HIGH	465 Hz	115	4.0
370-24L2	24	2	LOW	345 Hz	115	1.5
370-24H2	24	2	HIGH	465 Hz	115	1.5
370-36L2	36	2	LOW	345 Hz	115	1.0
370-36H2	36	2	HIGH	465 Hz	115	1.0
370-36/48L2	36/48	2	LOW	345 Hz	115	1.0
370-36/48H2	36/48	2	HIGH	465 Hz	115	1.0
370-48L2	48	2	LOW	345 Hz	115	1.0
370-48H2	48	2	HIGH	465 Hz	115	1.0
370-72L2	72	2	LOW	345 Hz	115	1.0
370-72H2	72	2	HIGH	465 Hz	115	1.0

Available brackets

PRESS TO HEAR A SAMPLE OF Model 370
Sound file is to demonstrate horns sound not loudness

MODEL 300-KOM / LOW TONE /105 Decibel
MODEL 305-KOM / HIGH TONE / 105 Decibel

The Models 300 and 305 are available in 12 or 24 volt. This is a two (2) terminal type horn that be ordered with either screw or 1/4" push-on terminals. Easily installs in any one (1) or two (2) wire system. All steel construction, painted black enamel finish. The diameter is 100mm. Can be ordered as a set or individually with flat or 90 degree mounting bracket. EEC approved.

SPECIFICATIONS
MODEL	VOLTAGE	TERMINALS	TONE	FREQUENCY	DECIBEL	AMP
300-6	6	2	LOW	340 Hz	105	3.0
305-6	6	2	HIGH	430 Hz	105	3.0
300-12	12	2	LOW	340 Hz	105	2.5
305-12	12	2	HIGH	430 Hz	105	2.5
300-24	24	2	LOW	340 Hz	105	2.0
305-24	24	2	HIGH	430 Hz	105	2.0

MODEL 300-2T / LOW TONE /115 Decibel
MODEL 305-2T / HIGH TONE / 105 Decibel

O.E. UNIVERSAL DISC HORNS, 12 volts, 2 terminal standard 1/4" push-on – easily fits industrial equipment motorcycles, cars and trucks. Painted steel construction assures long life in all weather environments. Easily installs in any one (1) or two (2) wire system. All steel construction, painted black enamel finish. The diameter is 100 mm. Can be ordered as a set or individually with flat or 90 degree mounting bracket.

SPECIFICATIONS
MODEL	VOLTAGE	TERMINALS	TONE	FREQUENCY	DECIBEL	AMP
300-2T	12	2	LOW	360 Hz	115	2
305-2T	12	2	HIGH	420 Hz	110	2

PRESS TO HEAR A SAMPLE OF MODEL 300-2T
PRESS TO HEAR A SAMPLE OF MODEL 305-2T

MODEL 357

LOW TONE /115 Decibel

Available in 12, 24, 36 & 48 Volt

O.E. UNIVERSAL DISC HORN, available in 12, 24, 36, & 48 volt, 2 terminal screw type – easily fits industrial equipment motorcycles, cars and trucks. Painted steel construction assures long life in all weather environments and has an attractive front plastic grill. Easily installs in any one (1) or two (2) wire system. All steel construction, painted black enamel finish. The diameter is 96 mm. Comes with strong zinc plated 90 degree mounting bracket.

SPECIFICATIONS

MODEL	VOLTAGE	TERMINALS	TONE	FREQUENCY	DECIBEL	AMP
357-12	12	2 Screw Type	LOW	385 Hz	114	2.2
357-24	24	2 Screw Type	LOW	385 Hz	114	1.8
357-36	36	2 Screw Type	LOW	385 Hz	114	1.5
357-48	48	2 Screw Type	LOW	385 Hz	114	1.5

HEAR A SAMPLE OF Model 357
Sound file is to demonstrate horns sound not loudness

MODEL 250-2T & 260-2T

12 VOLT / 110 Decibels

Models 250-2T & 260-2T are compact in size 70 mm, the small size makes installation easy. Available in12 volt, two (2) terminal type 1/4" push-on. Both models are all metal construction and you an choose from black enamel paint or chrome finishes. Comes with flat stamped metal bracket pre-mounted on horn.

SPECIFICATIONS
MODEL	VOLTAGE	TERMINALS	TONE	FREQUENCY	DECIBEL	AMP
250-2T	12	2	MID	387.5 Hz	110	1.0
260-2T	12	2	MID	387.5 Hz	110	1.0

PRESS TO HEAR A SAMPLE OF Models 250-2T & 260-2T

MODEL 310-2T / LOW / 112 Decibel
MODEL 315-2T / HIGH / 112 Decibel

Wolo's two (2) terminal 1/4" push-on design makes installation simple in any one (1) or two (2) wire system. Available in either 12 or 24 volt. This horn is constructed of both steel with black ABS plastic. The diameter is 80mm. Can be ordered as a set or individually with flat or 90 degree mounting bracket.

SPECIFICATIONS
MODEL	VOLTAGE	TERMINALS	TONE	FREQUENCY	DECIBEL	AMP
310-2T	12	2	LOW	375 Hz	112	8.0
315-2T	12	2	HIGH	475 Hz	112	8.0
310-2T24	24	2	LOW	375 Hz	112	4
315-2T24	24	2	HIGH	475 Hz	112	4

PRESS TO HEAR A SAMPLE OF Model 310-2T
PRESS TO HEAR A SAMPLE OF Model 315-2T
Sound file is to demonstrate horns sound not loudness

MODEL 310 / LOW / 112 Decibel
MODEL 315 / HIGH / 112 Decibel

Wolo's single (1) terminal 1/4" push-on design makes installation simple in any one (1) wire system. Available in volt. This horn is constructed of both steel with black ABS plastic. The diameter is 80mm. Can be ordered as a set or individually with flat or 90 degree mounting bracket
.

SPECIFICATIONS

MODEL	VOLTAGE	TERMINALS	TONE	FREQUENCY	DECIBEL	AMP
310	12	1	LOW	375 Hz	112	8.0
315	12	1	HIGH	475 Hz	112	8.0

PRESS TO HEAR A SAMPLE OF Model 310

PRESS TO HEAR A SAMPLE OF Model 315
Sound file is to demonstrate horns sound not loudness

MODEL 3010 / LOW TONE / 112 Decibel
MODEL 3015 / HIGH TONE /112 Decibel

Wolo's 3000 series heavy duty horn is a one (1) terminal type, available in either 12 or 24 volt. Produces a powerful sound to be heard. Constructed of steel and plastic making the 3000 series ideal for all environments cars, trucks, industrial equipment, buses and etc. Comes complete with all mounting hardware and two different mount brackets (flat & 90 degree) making installation easy for any application.

SPECIFICATIONS

MODEL VOLTAGE TERMINALS TONE FREQUENCY DECIBEL AMP
3010-12 12 1 LOW 375 Hz 114 8.0
3015-12 12 1 HIGH 475 Hz 114 8.0
3010-24 24 1 LOW 375 Hz 114 4
3015-24 24 1 HIGH 475 Hz 114 4

PRESS TO HEAR A SAMPLE OF Model 3010

PRESS TO HEAR A SAMPLE OF Model 3015
Sound file is to demonstrate horns sound not loudness

MODEL 386L / LOW TONE / 115 Decibel

MODEL 386H / HIGH TONE /115 Decibel

The Model 386 is a heavy duty disc type horn with a diameter of 115 mm. Available in either 12 or 24 volt with two (2) terminals screw or 1/4" push-on. Model 386 is constructed of all steel, finished in black enamel paint or white zinc. Can be ordered as a set or individually with flat or 90 degree mounting bracket. EEC approved.

SPECIFICATIONS
MODEL	VOLTAGE	TERMINALS	TONE	FREQUENCY	DECIBEL	AMP
386L-12	12	2	LOW	330 Hz	115	6
386H-12	12	2	HIGH	435 Hz	115	6
386L-24	24	2	LOW	330 Hz	115	4
386H-24	24	2	HIGH	435 Hz	115	4

MODEL 390

6 VOLT / 105 Decibels
12 VOLT / 105 Decibels

picture of 390 horn

The Model 390 is compact in size, 93 mm. The small size makes it easy to install any 12 volt application. This is a two (2) terminal type horn, 1/4 push-on. All steel construction, black enamel paint finish. Comes with flat stamped metal bracket pre-mounted on horn.

SPECIFICATIONS
MODEL	VOLTAGE	TERMINALS	TONE	FREQUENCY	DECIBEL	AMP
390-12	12	2	LOW	330 Hz	105	2.0

Wolo has the most complete line of horns for industrial application in the
U.S. and Canada.

QUICK REFERENCE TO OTHER WOLO PRODUCTS

HORNS WARNING LIGHTS & SIRENS ACCESSORIES NEW TECH

ELECTRIC HORNS WARNING LIGHTS SPECIALTY LIGHTING NEW ITEMS INSTALL INSTRUCTIONS
AIR HORNS MINI LIGHT BARS BACK-UP ALARMS CLEARANCE
INDUSTRIAL HORNS
FULL LIGHT BARS

MUSICAL & SPECIALTY HORNS STROBE HIDDEN WARNING LIGHTS
HEAVY DUTY TRUCK HORNS LED HIDDEN WARNING LIGHTS
DUKES OF HAZZARD DIXIE EMERGENCY SIREN & P.A.
MOTORCYCLE HORNS MOTOR DRIVEN SIRENS
MARINE HORNS
HAND HELD HORNS
TRAIN HORNS

HORNS	WARNING LIGHTS & SIRENS	ACCESSORIES	NEW	TECH
ELECTRIC HORNS	WARNING LIGHTS	SPECIALTY LIGHTING	NEW ITEMS	INSTALL INSTRUCTIONS
AIR HORNS	MINI LIGHT BARS	BACK-UP ALARMS	CLEARANCE
INDUSTRIAL HORNS	FULL LIGHT BARS
MUSICAL & SPECIALTY HORNS	STROBE HIDDEN WARNING LIGHTS
HEAVY DUTY TRUCK HORNS	LED HIDDEN WARNING LIGHTS
DUKES OF HAZZARD DIXIE	EMERGENCY SIREN & P.A.
MOTORCYCLE HORNS	MOTOR DRIVEN SIRENS
MARINE HORNS
HAND HELD HORNS
TRAIN HORNS

FOR PRODUCT INFORMATION CALL: 1-800-645-5808

Monday - Friday 8:00 A.M. thru 4:30 P.M. Eastern Standard Time

E-MAIL ANY QUESTIONS